| |
-
-
-
Optimum positioning of the insulation within the floor may depend on the positioning of the insulation in the walls. For instance, when insulating dry lining is specified for the walls, over-slab insulation enables continuity of insulation to be achieved.
|
-
-
-
Creating an insulation layer and a vapor barrier between the concrete slab and the ground beneath it is the best practice in insulating basement floors. The insulation barrier will help keep warm air in, and the vapor barrier will keep unwanted moisture out.
|
-
-
-
PlastiSpan insulation is a moulded expanded polystyrene (EPS)
insulation. The rigid closed cell structure assures long lasting
thermal insulation properties. PlastiSpan insulation is suitable and
recommended for use as the insulation component in floor, wall
and roof...
|
-
-
-
The Barrier underground insulation is a high-performance, ease to use and cost effective material for all of your underground and underconcrete insulation requirements. The core component is an extruded expanded polystyrene (EPS) material with a tough, heavy-duty 3mil...
|
-
-
-
The Barrier is an under the concrete or sub floor insulator/vapor barrier made with 3/8" extruded polystyrene and heavy duty 3 mil black polyethylene film laminated to both sides. Rolls are 4' wide x 60' long (240 square feet) x 3/8" thick.
|
-
-
-
The nu-Trenchfloor system has been awarded the Local Authority National Type Approval Certificate (LANTAC). Floors built to these drawings are therefore pre-approved by Building Control, to comply with current Building Regulations, particularly the thermal insulation...
|
-
-
-
Now, thanks to WarmlyYours, you can turn any cold room into a micro climate of warm, soothing heat with the simple addition an innovative WarmlyYours Tempzone or Environ II electric floor heating system.
|